Type : Fusion Splicer Sumitomo
Material : Silica glass
Fibre count / Profile types : Single / SMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657)
Fibre diameter : Cladding diameter : 80~150µm, Coating diameter: 100 ~ 1,000µm
Cleave length : 5 ~ 16mm with coating clamp
Splice loss (typical) : SMF : 0.02dB, MMF : 0.01dB, DSF : 0.04dB, NZDSF : 0.04dB
Return loss (typical) : 60dB or greater
Splice time (typical) : 7sec (SM G652 Quick Mode), 9sec (Auto Mode)
Heating time (typical) : 20sec (FPS-61-2.6 sleeve, Slim 60mm Quick Mode)
Applicable fibers: Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
Cladding dia: 80-150 μm
Cleave length: 5mm to 16mm with sheath clamp
Splice mode / heating mode: Total 100 splice modes / 30 heating modes
Splice loss : 0.02dB (SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS)
Splice time / tube heating time: Typical 7sec with SM / Typical 14sec with FP-03 (60mm) sleeve
Splice result storage: Last 2000 splices
Viewing methods / magnification: 2 axis CMOS camera with 4.73” color LCD.
Tension test: 1.96 to 2.25N
Applicable protection sleeve: 60mm, 40mm and Fujikura micro sleeves
Electrode life : 3000 splices
Size: 190 mm x 100 mm x 62 mm
EXFO Power Meter Weight: 0.48 kg
Detector: Ge
Power range (dBm): 10 to –70
Wavelength range (nm): 800 to 1650
Power uncertainty: ±5 % ± 0.1 nW
Resolution (dB): ±0.01 (10 dBm to –60 dBm)
Automatic offset nulling: Yes
Display units: dB, dBm, W
Tone detection: 270 Hz, 1 kHz and 2 kHz
Auto-switching: Yes
Data storage (items): more than 1000
Battery life (hours) (typical): 72
Type : Fusion Splicer Sumitomo
Material : Silica glass
Fibre count / Profile types : Single / SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF(G.657), EDF
Fibre diameter : Cladding diameter: 80µm~150µm, Coating diameter: 100µm~1,000µm
Cleave length : 5~16mm with coating clamp
Splice loss (typical) : SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB
Splicing time (typical) : 6 seconds (SM G.652 Quick Mode),7 seconds (SM G.652 standard Mode),8 seconds (Auto mode)
Heating time (typical) : 14 seconds (Slim 60mm 0.25 Quick Mode)
Splice & Heat cycles per battery full charge *2 : Approx. 230 (BU-11)
Fibre view & magnification : Two CMOS cameras observation 320X (zoom:700X) for X or Y single axis view, 88X for both X & Y dual axis view
Proof test : 1,96~2,09N
Applicable protection sleeve : 60mm, 40mm & Sumitomo Nano sleeves
Size : 120(W) × 154(D) × 130(H) mm (without anti-shock rubber)
Weight : 1.8kg (without battery) – 2.1kg (with battery)
Monitor : 4.1″ touch screen color LCD display
DC output : DC 12V (for JR-6)
USB port : USB 2.0 (mini-B type)
Storage media : SD / SDHC memory card
Brand: Sumitomo
Product name : TYPE-81C
Material; Silica glass
Fiber diameter : Cladding diameter: 80μm~150μm, Coating diameter: 100μm~1,000μm
Fiber count / Profile types: Single / SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF(G.657), EDF
Cleave length: ~ 16mm with coating clamp
Splice loss (typical): SMF : 0.01dB, MMF : 0.01dB, DSF : 0.03dB, NZDSF : 0.03dB
Return loss (typical) : 60dB or greater
Splice time (typical): 6sec(SM G652 Quick Mode), 7sec(SM G652 Std. Mode), 8sec(Auto Mode)
Heating time (typical): 14sec (FPS-61-2.6 sleeve, Slim 60mm Quick Mode )
Proof test: 1.96 ~ 2.09N
Applicable protection sleeve: 60mm, 40mm & Sumitomo Nano sleeves
Size: 120(W) x 154(D) x 130(H) mm (without anti-shock rubber)
Weight: 1.8kg (without Battery) / 2.0kg (with Battery BU-11S ) / 2.1kg (with Battery BU-11 )
Monitor: 4.1″ touch screen color LCD display
DC output: DC 12V (for JR-6)
USB port: USB 2.0 (mini-B type)
Storage media: SD / SDHC memory card MAX32GB
AC input: AC input
DC input : DC 1 0 ~ 15V
Battery pack: Li-ion 11.1V, 2,300mAh (BU-11S) / Li-ion 11.1V, 4,600mAh (BU-11)
Altitude : 0 ~ 6,000m, Temperature : -10 ~ +50°C, Humidity : 0 ~ 95% (non-condensing),Wind velocity : up to 15m/sec
Storage condition: Temperature : -40 ~ +80°C, Humidity : 0 ~ 95% (non-condensing), Battery : -20 ~ +30°C (long term)
Electrode life : 3,000 arc discharges
Data management: Can be stored
Type : Fusion Splicer Fujikura
Applicable Fibers : Single-mode (G.652 and G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
Cladding Diameter : 80 μm to 150 μm
Coating Diameter : 100 μm to 1,000 μm
Fiber Cleave Length : 5 to 16 mm
Typical Average Splice Loss : 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards
Splicing Time : ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber
Arc Calibration Method : Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes : 100 preset and user programmable modes
Splice Loss Estimate : Based upon dual camera core axis alignment data
Storage of Splice Result : Last 10,000 results stored in the internal memory
Fiber Display : X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification : 320X for single X or Y view, or 200X for X and Y view
Viewing Method : Dual cameras with 4.7 inch TFT color LCD monitor
Operating Condition : 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test : 1.96 to 2.25N
Applicable fibers: Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
Cladding dia: 80-150 μ m
Cleave length: 5mm to 16mm with sheath clamp
Splice mode / heating mode: Total 100 splice modes / 30 heating modes
Splice loss : 0.02dB (SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS)
Attenuation splice function: Intentional high splice loss of 0.1dB to 15dB(0.1dB step)can be made for an in-line fixed attenuator.
Splice time / tube heating time: Typical 7sec with SM / Typical 14sec with FP-03 (60mm) sleeve
Splice result storage: Last 2000 splices
Viewing methods / magnification: 2 axis CMOS camera with 4.73” color LCD.
Tension test: 1.96 to 2.25N
Applicable protection sleeve: 60mm, 40mm and Fujikura micro sleeves
Electrode life : Electrode life
Size / weight: 146W x 159D x 150H (mm) / 2.7kg (including battery)
Other features: PC software upgrade / data management
Terminals: USB 2.0 (Mini-B type) connector for PC communication
Brand: EasySplicer
Splicing method: V-grove (cladding alignment)
Fiber Types: SMF,MMF 50/125 µm fiber, 250 µm primary and 900 µm secondary coated fiber.
Fiber Handling: Fiber holders, 2 pairs (250 and 900)
Splice Programs: 2 pre-defined. SMF & MMF
Typical splice Loss: 0.03dB SMF, 0.01dB MMF
Typical Cycle time: 7s + 35s (splice cycle+ oven cycle)
Sleeve Dimensions: Max 64mm length, 2-5mm diameter supported by oven.
Communication: USB, mini usb plug.
Memory: Internal 1MB, External SD-Card
Monitor: LCD, color, 2,8″, 320×240 pixels
Magnification: Camera 140x
Operating Environment: 0-40°C, max 95% RH, non-
Weight: 800g
Power Sources: External power supply, 6V, 1.25A, 100-240VAC 50-60Hz, Build in Li-Ion battery pack